Zobrazit příspěvky

Tato sekce Vám umožňuje zobrazit všechny příspěvky tohoto uživatele. Prosím uvědomte si, že můžete vidět příspěvky pouze z oblastí Vám přístupných.


Témata - Bum

Stran: [1]
1
Hardware / debian stretch mikrofon
« kdy: 18. 06. 2017, 19:35:36 »
Ahojte
nainstaloval som novy debian a nejak mi nejde mikrofon, vie mi niekto pomoct?

Kód: [Vybrat]
lspci | grep -i audio
00:1b.0 Audio device: Intel Corporation 7 Series/C216 Chipset Family High Definition Audio Controller (rev 04)
Kód: [Vybrat]
lsmod | grep -i snd_
snd_hda_codec_hdmi     49152  1
snd_hda_codec_conexant    24576  1
snd_hda_codec_generic    69632  1 snd_hda_codec_conexant
snd_hda_intel          36864  2
snd_hda_codec         135168  4 snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec_hdmi,snd_hda_codec_generic
snd_hda_core           81920  5 snd_hda_intel,snd_hda_codec_conexant,snd_hda_codec,snd_hda_codec_hdmi,snd_hda_codec_generic
snd_hwdep              16384  1 snd_hda_codec
snd_pcm               110592  4 snd_hda_intel,snd_hda_codec,snd_hda_core,snd_hda_codec_hdmi
snd_timer              32768  1 snd_pcm
snd                    86016  13 snd_hda_intel,snd_hwdep,snd_hda_codec_conexant,snd_hda_codec,snd_timer,thinkpad_acpi,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_pcm

Kód: [Vybrat]
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

Kód: [Vybrat]
cat /proc/asound/cards
 0 [PCH            ]: HDA-Intel - HDA Intel PCH
                      HDA Intel PCH at 0xf3710000 irq 31

Dakujem za radu


2
Hardware / Tv karta
« kdy: 12. 11. 2015, 19:46:43 »
Ahojte dostalo sa mi do ruk usb dvbt vie mi s tym niekto pomoct?
Kód: [Vybrat]
lsusb
Bus 002 Device 002: ID 048d:9005 Integrated Technology Express, Inc.

Kód: [Vybrat]
uname -a
Linux bumssd 3.2.0-4-amd64 #1 SMP Debian 3.2.68-1+deb7u5 x86_64 GNU/Linux

niekde so sa docital ze tam treba toto

Kód: [Vybrat]
dmesg | grep dvb
[    6.021237] dvb_usb_it913x: Unknown parameter `#I'

Kód: [Vybrat]
ls /lib/firmware
dvb-usb-it9135-01.fw
dvb-usb-it9135-02.fw

Kód: [Vybrat]
lsmod | grep -i dvb
dvb_usb_it913x         17082  0
dvb_usb                18348  1 dvb_usb_it913x
dvb_core               77734  1 dvb_usb
rc_core                18286  12 ene_ir,ir_nec_decoder,rc_rc6_mce,ir_rc5_decoder,ir_rc6_decoder,ir_jvc_decoder,ir_sony_decoder,ir_mce_kbd_decoder,ir_lirc_codec,dvb_usb,dvb_usb_it913x
i2c_core               23876  6 i2c_algo_bit,drm,drm_kms_helper,i2c_i801,nouveau,dvb_usb
usbcore               128741  7 ehci_hcd,uhci_hcd,usbhid,btusb,dvb_usb,dvb_usb_it913x

Kód: [Vybrat]
w_scan
w_scan version 20120605 (compiled for DVB API 5.4)
guessing country 'SK', use -c <country> to override
using settings for SLOVAKIA
DVB aerial
DVB-T Europe
scan type TERRESTRIAL, channellist 4
output format vdr-1.6
output charset 'UTF-8', use -C <charset> to override
Info: using DVB adapter auto detection.
main:3220: FATAL: ***** NO USEABLE TERRESTRIAL CARD FOUND. *****
Please check wether dvb driver is loaded and
verify that no dvb application (i.e. vdr) is running.

a neviem co este k tomu. Dakujem za kazdy kopanec. :)

3
Hardware / lenovo E531, fn tlacitko furt zapnute.
« kdy: 03. 08. 2014, 19:05:04 »
Ahojte.

kupil som si lenovo e531 postupne zdolavam nastavenia, ale niektore veci netusim ako prepnut.
Napriklad tlacitko fn je furt zapnute. Teda napriklad f2 mi znizi hlasitost. ale ked stlacit alt + f2 neda mi moznost spustania programov. Musim stlacit fn + alt+f2.
Ma niekto napad?


4
Všeobecná podpora / win soft
« kdy: 25. 11. 2013, 22:29:55 »
Ahojte

Da sa toto rozbehat pod Linuxom?
http://www.process.sk/pci/cs/software?lang=cs
Kamarat to chce nahodit na server ale ja som si moc nie isty.

5
Všeobecná podpora / Synergy
« kdy: 19. 06. 2013, 01:15:44 »
Ahojte.
Pouziva niekto synergy?
Potreboval by som pomoc s nastavenim.
Nastavil som toto do synergy.conf
Kód: [Vybrat]
section: screens
       bumssd:
       bumdeb:
    end

    section: links
       bumssd:
           right = bumdeb

       bumdeb:
           left = bumssd
    end


Spustam ->
Kód: [Vybrat]
synergys -f --config /home/bum/.synergy.conf
Hlaska po spusteni ->
Kód: [Vybrat]
synergys -f --config /home/bum/.synergy.conf
2013-06-19T01:11:43 INFO: Synergy 1.3.8 Server on Linux 3.2.0-4-amd64 #1 SMP Debian 3.2.46-1 x86_64
        /tmp/buildd/synergy-1.3.8/src/cmd/synergys/synergys.cpp,1098
2013-06-19T01:11:43 DEBUG: opening configuration "/home/bum/.synergy.conf"
        /tmp/buildd/synergy-1.3.8/src/cmd/synergys/synergys.cpp,1113
2013-06-19T01:11:43 DEBUG: configuration read successfully
        /tmp/buildd/synergy-1.3.8/src/cmd/synergys/synergys.cpp,1124
2013-06-19T01:11:43 DEBUG: XOpenDisplay(":0.0")
        /tmp/buildd/synergy-1.3.8/src/lib/platform/CXWindowsScreen.cpp,901
2013-06-19T01:11:43 DEBUG: xscreensaver window: 0x01000001
        /tmp/buildd/synergy-1.3.8/src/lib/platform/CXWindowsScreenSaver.cpp,342
2013-06-19T01:11:43 DEBUG: screen shape: 0,0 1440x900
        /tmp/buildd/synergy-1.3.8/src/lib/platform/CXWindowsScreen.cpp,136
2013-06-19T01:11:43 DEBUG: window is 0x03000004
        /tmp/buildd/synergy-1.3.8/src/lib/platform/CXWindowsScreen.cpp,137
2013-06-19T01:11:43 DEBUG: opened display
        /tmp/buildd/synergy-1.3.8/src/lib/synergy/CScreen.cpp,41
2013-06-19T01:11:43 DEBUG: registered hotkey ScrollLock (id=ef14 mask=0000) as id=1
        /tmp/buildd/synergy-1.3.8/src/lib/platform/CXWindowsScreen.cpp,729
2013-06-19T01:11:43 NOTE: started server
        /tmp/buildd/synergy-1.3.8/src/cmd/synergys/synergys.cpp,515
2013-06-19T01:11:43 INFO: screen "bumssd" shape changed
        /tmp/buildd/synergy-1.3.8/src/lib/server/CServer.cpp,1194

Nejak to cele nejde.
Za radu vopred dakujem

6
Všeobecná podpora / MC a pohyb pomocí šipek
« kdy: 11. 04. 2012, 23:34:37 »
Ahojte. Funguje vám v mc pohyb medzi adresármi  šípkam?
Mám gnome 3 a v mc je zakliknuté cd follows links, aj napriek tomu sa nim nemozem pohybovať.

7
Všeobecná podpora / [Vyřešeno] iny jazyk - language pack
« kdy: 11. 04. 2012, 20:24:23 »
Ahojte chcem sa spytat ako dostanem do beb wheezy iny jazyk ako predvoleny pri instalacii systemu?
Hladal som language pack ale ziadny som nenasiel.

Dakujem  za radu.

8
Hardware / usb server
« kdy: 09. 02. 2012, 16:27:03 »

9
Všeobecná podpora / squeeze sa zasekne
« kdy: 21. 06. 2011, 00:20:51 »
Ahojte mam problem a to takyto. robim si robim na pc a zrazu sa mi zasekne cely system a neda si nic robit len natvrdo vypnut laptop.
je to uz starsi tym tak to moze byt chyba aj laptopu ale ak sa to da nejak dostelovat budem rad. Prechadzam z Ubuntu a teda v debiane zatial nie som moc rozkukany, ale uz som si par veci v daka aj tomuto foru doladil..

Posielam kernel log. na zaciatku tam vyhadzuje nejaku chybu zvukovky ale predpokladam ze to nevie najst nejake ovladace na fax modem. Co ma az tak netankuje. viac ma trapi to zasekavanie sa a tiez nutna asistencia pri vypinani a restartovani--> skratka nabehne cierna obrazovka vypise par riadkov co povypinal a zarazu ticho nedeje sa nic , stlacim hociaku klavesu a vypise dalsich neviem kolko riadkov ze vypol dalsie veci a zas ticho. stisk klavesu zasramoti a vypne sa. sak ja ho postiskam len je to otrava. :)

Kód: [Vybrat]
Jun 20 23:23:39 debian kernel: [    7.552707] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff: clean.
Jun 20 23:23:39 debian kernel: [    8.656029] AC'97 1 does not respond - RESET
Jun 20 23:23:39 debian kernel: [    8.656236] AC'97 1 access is not valid [0xffffffff], removing mixer.
Jun 20 23:23:39 debian kernel: [    8.656308] Unable to initialize codec #1
Jun 20 23:23:39 debian kernel: [    8.712053] intel8x0_measure_ac97_clock: measured 55227 usecs (2661 samples)
Jun 20 23:23:39 debian kernel: [    8.712058] intel8x0: clocking to 48000
Jun 20 23:23:39 debian kernel: [    8.714250] Intel ICH Modem 0000:00:1f.6: PCI INT B -> GSI 17 (level, low) -> IRQ 17
Jun 20 23:23:39 debian kernel: [    8.714276] Intel ICH Modem 0000:00:1f.6: setting latency timer to 64
Jun 20 23:23:39 debian kernel: [    9.216027] AC'97 1 does not respond - RESET
Jun 20 23:23:39 debian kernel: [    9.216242] AC'97 1 access is not valid [0xffffffff], removing mixer.
Jun 20 23:23:39 debian kernel: [    9.216318] Unable to initialize codec #1
Jun 20 23:23:39 debian kernel: [    9.216399] Intel ICH Modem 0000:00:1f.6: PCI INT B disabled
Jun 20 23:23:39 debian kernel: [    9.216419] Intel ICH Modem: probe of 0000:00:1f.6 failed with error -5
Jun 20 23:23:39 debian kernel: [   15.855882] Adding 2421752k swap on /dev/sda5.  Priority:-1 extents:1 across:2421752k
Jun 20 23:23:39 debian kernel: [   16.027405] EXT3 FS on sda1, internal journal
Jun 20 23:23:39 debian kernel: [   16.268978] loop: module loaded
Jun 20 23:23:39 debian kernel: [   17.720604] fuse init (API version 7.13)
Jun 20 23:23:39 debian kernel: [   21.930678] RPC: Registered udp transport module.
Jun 20 23:23:39 debian kernel: [   21.930683] RPC: Registered tcp transport module.
Jun 20 23:23:39 debian kernel: [   21.930685] RPC: Registered tcp NFSv4.1 backchannel transport module.
Jun 20 23:23:39 debian kernel: [   22.241882] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
Jun 20 23:23:40 debian kernel: [   22.516102] svc: failed to register lockdv1 RPC service (errno 97).
Jun 20 23:23:40 debian kernel: [   22.522428] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
Jun 20 23:23:40 debian kernel: [   22.544198] NFSD: starting 90-second grace period
Jun 20 23:23:41 debian kernel: [   24.041130] eth0: link up, 100Mbps, full-duplex, lpa 0xC5E1
Jun 20 23:23:50 debian kernel: [   33.299122] Bluetooth: Core ver 2.15
Jun 20 23:23:50 debian kernel: [   33.299246] NET: Registered protocol family 31
Jun 20 23:23:50 debian kernel: [   33.299250] Bluetooth: HCI device and connection manager initialized
Jun 20 23:23:50 debian kernel: [   33.299255] Bluetooth: HCI socket layer initialized
Jun 20 23:23:51 debian kernel: [   33.578570] Bluetooth: L2CAP ver 2.14
Jun 20 23:23:51 debian kernel: [   33.578575] Bluetooth: L2CAP socket layer initialized
Jun 20 23:23:51 debian kernel: [   33.773911] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Jun 20 23:23:51 debian kernel: [   33.773917] Bluetooth: BNEP filters: protocol multicast
Jun 20 23:23:51 debian kernel: [   33.888977] Bridge firewalling registered
Jun 20 23:23:52 debian kernel: [   34.637369] Bluetooth: SCO (Voice Link) ver 0.6
Jun 20 23:23:52 debian kernel: [   34.637375] Bluetooth: SCO socket layer initialized
Jun 20 23:23:52 debian kernel: [   35.036036] eth0: no IPv6 routers present
Jun 20 23:23:53 debian kernel: [   35.993855] lp0: using parport0 (interrupt-driven).
Jun 20 23:23:53 debian kernel: [   36.039718] ppdev: user-space parallel port driver
Jun 20 23:24:46 debian kernel: [   50.815087] ACPI: EC: GPE storm detected, transactions will use polling mode
Jun 20 23:28:32 debian kernel: [  277.774234] psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 2 bytes away.
Jun 20 23:28:34 debian kernel: [  278.890377] psmouse.c: resync failed, issuing reconnect request
Jun 20 23:28:55 debian kernel: [  300.008048] Machine check events logged
Jun 20 23:30:30 debian kernel: [  395.480090] psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 1 bytes away.
Jun 20 23:30:33 debian kernel: [  399.806671] psmouse.c: resync failed, issuing reconnect request
Jun 20 23:34:26 debian kernel: [  631.309123] psmouse.c: GlidePoint at isa0060/serio4/input0 lost synchronization, throwing 5 bytes away.
Jun 20 23:34:27 debian kernel: [  631.819519] psmouse.c: resync failed, issuing reconnect request

Snad z toho nieco vycitate. :)

Vopred dik.

jo a este som zabudol. myslel som ze mi tieto problemy robi laptop- mode tak som ho dal prec, ale nepomohlo to.

Stran: [1]